Mangled model restored to former glory.

If you’ve got a damaged model that looks beyond repair make sure you contact us before you throw it in the skip – we may be able to give it a whole new lease of life. This industrial model had been shipped to events all round Europe since 2015 (when we built it) before it got badly damaged in transit. The client asked if we could repair it and we were happy to oblige. Of course it helped that we’d made the model originally but even if your model was made elsewhere, as long as you’ve kept most of the broken pieces and can supply plenty of photos of how it looked before the damage, we should be able to restore it to its former glory at a significant saving compared with rebuilding it from scratch.

Topographical landscape model.

Featuring the site of a gas-fired power station on the Pembrokeshire coast, this large topographical model was built at 1:1000 scale which is an ideal scale option for a large spread-out site. At this scale 1 millimetre represents 1 metre so a 2Km long site fits onto a 2m long base which is big but still manageable, as long as you have space in your marketing suite. Even though the scale is small it still allows us to show a recognizable level of detail for any important buildings whilst any surrounding context buildings can be shown as massing blocks which helps to keep costs down.

Topographical contour model in 4 sections.

Orkney Islands Council asked us to produce this stylized representation of the Scapa Flow area which was to be used for marketing events and as focal point for internal meetings. Due to the size of the model (1.8m x 1.4m) it was constructed in four sections that could be stacked in a flight case for storage and transportation but could also be quickly fitted together when required. Although the islands show a simplified representation of the contours at 25m steps, the main purpose of the model was to illustrate the water depths in Scapa Flow and the surrounding seas. Sea charts normally show the deep areas in lighter blues but because this model was going to be viewed by mixed audiences the client asked us to reverse this colour coding and show the deeper areas in the darker colour. If you click on the main pic to enlarge it you’ll notice we also supplied a Perspex overlay which shows the relative size of Edinburgh to Scapa Flow. This is the third project we’ve completed for Orkney Islands Council this year.

Sales models for two housing developers.

Earlier this month we delivered two housing models to different developers on the same day. We’d actually finished both models a few weeks earlier but neither client had their marketing suite set up so they asked us to store the models until they were ready on site. Both marketing suites were completed in early August and, whilst we deliver projects all over the UK, on this occasion the sites were less than 40 miles apart so it made sense to deliver them on the same day. We produce at least a dozen of these residential sales models every year alongside industrial and display models of all types for a variety of different marketing requirements.

New lease of life for three 15 year old models.

We’re frequently asked to mend an existing model but this project was particularly challenging because it involved three very large, very heavy, 15 year old models, all in poor condition. Furthermore the client wanted a custom-built stand that would display the models one above the other so they wouldn’t take up too much space in their reception area. The main reception desk was made from birch-faced ply so we created this simple, sturdy display stand in the same material. The stand was designed as three separate structures that locked together when stacked on top of each other. We enjoyed repairing the models to give them a new lease of life but what made the project even more fun was designing and building a simple, elegant piece of furniture to display them on.

Interactive model with speed and direction controls

This unusual industrial model was a real challenge on two fronts – firstly because of the very complex shaped components involved but also because of the requirement for a very specific interactive element. The thruster comprises a large propeller that forces water downwards through a deflector that can be rotated through 360 degrees to direct the water thrust in any direction. This is the USP of the client’s product and, as such, he wanted the model to incorporate a rotating propeller (with speed control) and a movable deflector (clockwise and anti-clockwise) at 6rpm. We also had to work out how to mount the model in a cut-away view of a ship’s bows and create a cut-away view of the thruster to show the main working components. The model was recently shipped in a large flight case to a trade event in Germany – one of the inset images shows it on their stand.

Military Equipment Model "PURIBAD" Airborne Delivery System – Scale 1:10

Platform, Universal, Rigid Inflatable Boat, Airborne Delivery... is what it stands for, in case you were wondering. The name is an acronym for a platform specially designed for air dropping ready-to-go speedboats (or RIBs) into the sea. The system literally launches itself out of the back of a plane, separates from the boat, deploys parachutes and lands both platform and RIB safely into the water. The platform can be recovered for further use or sunk for covert operations. Having explained what it is now I can tell you a bit about the model. It’s at 1:10 scale (10cm equals 1 metre) and was commissioned as a demonstration tool for use at exhibitions. The client needed all the working components to be accurately modelled (hooks, straps, spring release clips, etc) so that he could explain the simplicity of the design and what made it such a reliable, proven system. It was a challenging project because of the high level of detail required and the wide variety of model making techniques needed to make all the model components. We were very pleased with the final result though and hopefully you can appreciate the quality of the model from the photographs.

Industrial Model of Container Tilter – Scale 1:10

The client for this project needed a working model to demonstrate the unique benefits of their product, a machine to increase the efficiency of container loading. Previously they’d had to ship the real thing to exhibitions at great expense but the working model offered a much more practical solution. Accurately detailed with all the machine’s time saving features fully operational, the model allowed the client to quickly and clearly demonstrate exactly how his product worked. The model’s first trip was to America but with plans for it to travel to many different international venues, we also designed and built a flight case that would protect it in transit and then convert on site into a neat plinth to display the model on.