Realistically detailed farm landscape for milk producer.

This is the second 1:32 scale model we’ve produced in the last 3 months – you can see the previous project if you click on the Recent Projects tab above and scroll back to October. As you can see from the photos, this scale allows us to show a high level of realistic detail in the landscaping and the structures. It’s also useful because a lot of detailed “off-the-shelf” items such as cows and vehicles can sourced on line. This model is actually a direct physical representation of a CGI model the company had produced for a previous marketing promotion.

Topographical landscape model.

Featuring the site of a gas-fired power station on the Pembrokeshire coast, this large topographical model was built at 1:1000 scale which is an ideal scale option for a large spread-out site. At this scale 1 millimetre represents 1 metre so a 2Km long site fits onto a 2m long base which is big but still manageable, as long as you have space in your marketing suite. Even though the scale is small it still allows us to show a recognizable level of detail for any important buildings whilst any surrounding context buildings can be shown as massing blocks which helps to keep costs down.

Topographical contour model in 4 sections.

Orkney Islands Council asked us to produce this stylized representation of the Scapa Flow area which was to be used for marketing events and as focal point for internal meetings. Due to the size of the model (1.8m x 1.4m) it was constructed in four sections that could be stacked in a flight case for storage and transportation but could also be quickly fitted together when required. Although the islands show a simplified representation of the contours at 25m steps, the main purpose of the model was to illustrate the water depths in Scapa Flow and the surrounding seas. Sea charts normally show the deep areas in lighter blues but because this model was going to be viewed by mixed audiences the client asked us to reverse this colour coding and show the deeper areas in the darker colour. If you click on the main pic to enlarge it you’ll notice we also supplied a Perspex overlay which shows the relative size of Edinburgh to Scapa Flow. This is the third project we’ve completed for Orkney Islands Council this year.

Interactive model to illustrate best water management.

This interactive model was commissioned by the NFU as a visual demonstration to farmers of good water management practices on their land. The model shows two different catchments, one illustrating a high risk landscape with poor farming practices and the other showing a low risk landscape where the delivery of good practice minimises risks. The buttons on the front of the model activate LEDs set in the landscape to highlight different aspects of land management practice. The brightly coloured area shows an example of a Scimap, a graphic plan that shows farmers the risk areas across their land.

Landscape model with accurate topography.

This large topographical model is 3m long by 2m wide and is made in four sections that butt together on adjustable height trestles. It’s the second large landscape model we’ve made for this client (see Recent Projects December 2016) and was commissioned as part of a public consultation process for a proposed development near Coventry. The aim of the model was to demonstrate how high embankments and landscaping around the site would screen it from surrounding villages so it was important that the on-site levels and surrounding topography were all accurately recreated. The buildings are shown as massing blocks due to the small scale (1:1250). Each metre is represented by just 0.8mm, so that the 16 metre high commercial buildings shown on the model are only approx. 13mm high.

1:20 scale sectional model of commercial building.

This is the third educational model we’ve made for the University of South Wales. As with the previous two projects in our Latest Projects section this is another example of a satisfied customer coming back to us with a new order. Aimed at students in the construction sector, the purpose of this model was to illustrate the major elements that make up a typical commercial office building, including foundations, steel work, cladding components and final external finishes. As you can see from the images this was a very technically complex project but the client knew from previous models we’d produced for him that we had the skill and understanding to deliver an extremely accurate, perfectly detailed demonstration model.

 White styled model showing detailed atrium interior

After commissioning the site model shown in the previous post, the client decided they also needed a larger scale model to illustrate the most exciting element of their proposed new design – the full height atrium that anchors the two main wings of the building. The larger scale means it is much easier to appreciate the dramatic space created by the atrium enclosure, which features viewing galleries, multi-level bridge links, and subtle layering of the internal elevations. To allow all round views through to the atrium, the main wings of the building were modelled as cut-way sections. This also helped emphasise that the central space was the main focus of the model.