Mangled model restored to former glory.

If you’ve got a damaged model that looks beyond repair make sure you contact us before you throw it in the skip – we may be able to give it a whole new lease of life. This industrial model had been shipped to events all round Europe since 2015 (when we built it) before it got badly damaged in transit. The client asked if we could repair it and we were happy to oblige. Of course it helped that we’d made the model originally but even if your model was made elsewhere, as long as you’ve kept most of the broken pieces and can supply plenty of photos of how it looked before the damage, we should be able to restore it to its former glory at a significant saving compared with rebuilding it from scratch.

Industrial model featuring interactive illumination.

Although we specialise in architectural models we also regularly produce high quality industrial models such as this model of a Cryobattery power station which incorporates interactive LED illumination. The CryoBattery system uses renewable sources to compress air in tanks which can later be used to generate power. In effect, it acts as large battery to store energy for when it is most needed. This is very much a stylised representation of the facility with the strong colours being used to indicate different parts of the process. The LED illumination rises slowly upwards to the top of the vessels and then gradually drops down again to represent the “filling up” and “emptying” phases of the CryoBattery facility.

Set of 7 models shipped in Pelicases.

The client for this project initially had the models 3D printed but quickly realised that the quality of finish wasn’t good enough for their requirements so they decided to contact us for help. They wanted to use the models for marketing purposes so it was important the technical spec and level of finish reflected the high quality of their product. We designed the models in three parts that could be easily slotted together including two interchangeable options for the top section. The rotors were able to be freely turned and we recreated the yaw action which allows the turbine assembly to turn and face the direction of the wind. We also added the reflective solar panels shown on top of the wind deflectors and finished the models in the specified white RAL colour. We then provided a Pelicase with tailored foam inserts for each of the 7 models which you can see in one of the photos above.

Custom-built planning tool for Logistics division.

This multi-layered display is a custom-built planning tool for the Ministry of Defence Logistics team. They got in touch with a sketch design (literally a very rough sketch) and asked if it was something we could build. The idea was to create 4 vertically stacked transparent maps showing all the UK MOD bases so that the team could assess varying logistics routes by linking different depots both horizontally and vertically with colour-coded string. Our solution was this aluminium framed design that can be easily bolted together but also “flat-packs” into the white base for storage when not in use (which you can see in the inset pic above).

Another high quality satellite model for the British space industry.

Completed last month, we’ve made several variations of this life-size CubeSat model for a number of different clients and we’re currently in mid-production of a further satellite model for yet another client (who saw this model and liked it). Designed for easier shipping, this model comes as four separate main components – acrylic base; tubular steel mount; main body; solar array panels – that can be easily slotted together on site. Even the aerials slot into place once the main model is assembled.

White styled model to show proposed new development area.

We’ve worked with several different county councils across the UK but, as you’d expect, we’ve done a lot of work for our local county council and this master plan model is our latest project for them. Commissioned as a part of public consultation process one of the major purposes of the model is to demonstrate the scale and extent of a proposed major redevelopment of the area, including a new Arena venue for concerts and events. Although it’s hard to pick up in these photos, the existing on-site buildings are shown in light grey and the proposed new buildings are shown in white. The model also incorporates LED illumination which is used to highlight some of the key proposals.

Roof-off view to show new machinery layout.

This model was commissioned to illustrate the proposed new factory layout for a precision engineering company serving the aerospace industry. The model was to be used initially for evaluation purposes prior to finalising plans but had a secondary function as on-going staff-training tool. To keep costs down the level of detail on the machinery was kept to a stylised level but the individual machines also needed to be instantly recognisable to their highly skilled workforce. The colour coding was added to help clarify zones of operation. The upper floor of the offices and the mezzanine level in the production area were both made as removable elements to facilitate a clear view of the ground floor layout.

Phase 2 buildings added after first phase sells quickly.

When we originally delivered this model in March last year the phase 1 buildings were all fully detailed but the client (Enterprise Retirement Living) only wanted grey massing blocks for the phase 2 buildings, three new-build apartment blocks, which were still in the design process. Seven months down the line and with the model helping generate strong sales, the client asked us to add detailed versions of the apartment blocks which we completed before Christmas. The main image above shows the three new detailed buildings we’ve just added. The right hand smaller image shows how the model looked back in March with the three grey massing blocks visible in the background.

Keeping clients happy means repeat business.

Completed just before Christmas, this was the third of three models we produced for the same client last year. We first started working with this client back in 2016 and because we delivered a high quality model at the right price and on schedule they’ve come back to us for 2 or 3 models every year since. We know that keeping customers happy means repeat business and the way we do that is by ensuring every aspect of our service is of the highest quality. We’d welcome the opportunity to become a regular, trusted supplier for your business.

Fully detailed sales model exported to Ireland.

“The model looks amazing. You and your team should be really proud, certainly exceeding our expectations.” This was the response from the client on receiving the first photos of the finished model. The client was just as pleased when the model actually arrived in their offices in Dublin and very quickly confirmed a new order for a model of one of their other developments which we will start working on next month. It’s fair to say we were really proud with how this model came together, particularly as we had to work in a different way to comply with socially distanced working. This involved a mix of working from home and staggered shifts so that we were able to maintain a 2m distance in the workshop. We are also very used to working with masks so when necessary we were able to have more than one person working round the model at the same time.