Ancient monument laser-cut and engraved from solid Ash wood.

This small scale, stylised architectural model was commissioned as part of a test project for a new educational play scheme for young children. The client wanted a simplified representation of this ancient monument in a pale coloured wood so we suggested laser cutting and engraving out of solid ash would be a suitable option. The main photo shows the 800mm long model photoshopped into a desert setting which is the context it will be used in. The smaller photos show the two sides of the model and a close up detail. You can click on the photos to enlarge them.

Educational models for two different clients.

We’ve produced a few house section models, or what might be termed “dolls house” models, over the last few years but they don’t come up very often so it was quite a coincidence when two unrelated clients ordered these very similar models within a few weeks of each other towards the end of last year. Both models were to be used as educational aids; one for a London based university and the other for a South coast county council. We delivered the models earlier this month and both clients were delighted with the finished results.

Fourth model this year for national developer.

One of the UK’s largest housing developers has come back to us again for a 4th sales model this year. They’ve been coming to us for many years for their sales models because of the consistent high quality and value we deliver every time. This model was particularly challenging because of the steep topography of the site which meant that virtually every plot was on a different level. As a sales tool it was important that we accurately modelled every step, retaining wall and embankment across the site so that purchasers could easily understand the levels and contours around whichever house they were looking to buy.

2.5m high models of Communications Masts.

We recently completed this pair of 2.5m high models of ships communications masts for use at DSEI, the premier UK defence Industry event. The masts, one for Port side, one for Starboard, were designed in sections that could be packed into a flight case for shipping and then be easily assembled at the venue. The design also included an extendable aluminium tube to give added strength to the masts’ main structural core. The main photo above shows the models on stand at this year’s event.

Third project this year for South of England developer.

As with the previous post, this is one of three sales models we’ve produced this year for another of our regular clients who keep coming back to us for high quality sales models for their marketing suites. This model was at 1:150 scale which is the ideal scale option for smaller housing developments. Larger developments typically need to be at 1:200 scale or even 1:250 scale just to keep the model base to a manageable size. We were planning to post photos of all three projects this month but two of the almost completed models have gone on hold at the last minute due to some late design changes on site. It’s probably going to be a couple of months before the other two models can be fully completed but hopefully we’ll be able to post finished pics towards the end of this year.

Our Latest Projects | Modelmakers | Our model centre of attention at launch event.

Large sales model for lakeside housing development.

Our recently completed sales model stole the show at a waterside launch event earlier this month. At 2.6m long x 1.6m wide this very large model was the centrepiece of a 3 day event set up in a temporary marquee on site. The client had also set up a large screen with animated CGI views of the development but by all accounts the potential purchasers were drawn instantly to the model because it gave such a clear and immediate understanding of the houses, gardens and overall layout of the site. Due to its size the model was made in two halves for portability. Phase 2 of the development, shown as a separate grey area on the model, will be added at a later date. The model will eventually be the focal point of a permanent on-site marketing suite.

Comments are closed
Our Latest Projects | Modelmakers | Cardiff model steals the show at MIPIM London

 Interactive Masterplan Model 1:750 Scale

 

By all accounts, our 6.5m x 5.5m interactive model of Cardiff stole the show at Olympia during London’s inaugural MIPIM global property conference last week. Our team set it up on Tuesday for the 3 day event and then dismantled it on Friday evening, bringing it back to Cardiff (in two vans) where it is shortly going to set up in a permanent marketing suite. Once the model is in its new home it will be used to promote the city of Cardiff to national and international investors. It is a fully interactive model controlled via a large touchscreen which activates over 30 different lighting zones on the model and at the same time displays relevant information pages on the touchscreen. The screen images will also be projected onto a giant screen so that the information is visible to all.

Comments are closed